2015 JD 655K Track Loader

Operating Weights & Dimensions

• Base Weight: 18,422 kg (40,614 lb) with standard equipment and full fuel
• Overall Height: 3120 mm (10 ft 3 in)
• Length to Front of Track: 4920 mm (16 ft 2 in)
• Overall Length with Bucket (General Purpose): 6735 mm (22 ft 1 in)
• Track Gauge: 1740 mm (5 ft 9 in)

• Ground Clearance (excluding grouser height): approx. 35 mm (1.4 in)

  Engine

• Model: John Deere PowerTech™ PVS 6068
• Emission Standard: EPA Final Tier 4 / EU Stage IV
• Displacement: 6.8 L (414 cu. in.)
• Net Rated Power: 116 kW (155 hp) @ 1700 rpm
• Net Peak Torque: 689 Nm (508 ft-lb) @ 1400 rpm
• Aspiration: Turbocharged with charge-air cooler
• Air Cleaner: Dual-stage dry tube with tangential unloader
• Cooling: Variable-speed suction fan with automatic reversing
• Coolant Rating: -37°C (-34°F)

• Radiator Fins: 10.2 per inch

  Powertrain

• Transmission: Automatic dual-path hydrostatic drive with load sensing
• Independent variable-displacement piston pumps power each track
• Ground speed selection and reverse speed ratios adjustable (100%, 115%, 130%)
• Max Travel Speed: 10 km/h (6.2 mph) forward and reverse
• Steering: Single-lever with speed and direction control, full power turns
• Final Drives: Double-reduction planetary, 46.41:1 total ratio
• Max Drawbar Pull: 242 kN (54,500 lb)

• Brakes: Hydraulic service brakes, automatic dynamic braking, spring-applied parking brakes

  Hydraulics

• Type: Load-sense piston pump
• Pump Flow: 189 L/min (50 gpm) nominal, up to 197 L/min (52 gpm) unloaded high idle
• System Pressure: 26,028 kPa (3,775 psi)
• Controls: Dual-axis joystick or 2/3-lever stackable controls

• Cylinders: Heat-treated chrome-plated rods with replaceable bushings

  • Lift Cylinders: 125 mm bore, 70 mm rod, 757 mm stroke
  • Bucket-Dump Cylinder: 160 mm bore, 95 mm rod, 493 mm stroke

  Electrical

• Voltage: 24 V
• Batteries: 2 x 12 V, 950 CCA capacity
• Alternator: 100 amp

• Lights: Halogen, forward, rear, engine compartment

  Undercarriage

• Track Frame: Front and rear guides with sprocket guards
• Tracks: Deep-heat-treated sealed and lubricated links and rollers
• Track Gauge: 1740 mm (68.5 in)
• Grouser Width: 510 mm (20 in) standard, optional 560 mm (22 in)
• Track Rollers: 6 per side
• Track Length on Ground: 2414 mm (95 in)
• Ground Contact Area:
  • 510 mm grouser: 24,622 cm² (3,816 in²)
  • 560 mm grouser: 27,036 cm² (4,191 in²)

• Ground Pressure: Approx. 10.7 psi (general purpose bucket, 510 mm grouser)

  Buckets (with teeth)

• General Purpose:
  • Width: 2470 mm (97 in)
  • Capacity: 1.9 m³ (2.4 yd³)
  • Weight: 1208 kg (2665 lb)
  • Breakout Force: 148 kN (33,271 lbf)
  • Static Tipping Load: 12,443 kg (27,432 lb)

• Multipurpose:

  • Capacity: 1.6 m³ (2.1 yd³)
  • Weight: 1480 kg (3262 lb)
  • Breakout Force: 148 kN (33,271 lbf)
  • Static Tipping Load: 12,184 kg (26,861 lb)
  • Max Clamping Force: 8514 kg (18,731 lb)

  Operator Station

• ROPS certified (ISO 3471 – 2008)

• Spacious cab with climate control and pressurizer options

  Service Capacities

• Fuel Tank: 263 L (69.5 gal)
• Cooling System: 30.3 L (8.0 gal)
• Engine Oil: 24.6 L (6.5 gal)
• Transmission Reservoir: 66.6 L (17.6 gal)
• Hydraulic Reservoir: 121.5 L (32.1 gal)
• Diesel Exhaust Fluid (DEF) Reservoir: 8.5 L (2.2 gal)
• Final Drive Oil (inner): 8.0 L (2.1 gal) per side
• Final Drive Oil (outer): 15.6 L (4.1 gal) per side